Switching The Sound Muting/Attenuation; Adjusting A Blurry Or Low Contrast Screen; Other Functions; Setup Adjustments - Pioneer AVIC-D3 Operation Manual

MAN-AVIC-D3-EN.book Page 110 Monday, January 15, 2007 8:51 AM
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a mobile
phone connected to navigation system.
• When the voice guidance is output.
The sound muting/attenuation function does
not work when you use a mobile phone con-
nected to the navigation system via Bluetooth
wireless technology.
1
Touch "Mute Input/Guide" in the Initial
menu.
Each touch of the "Mute Input/Guide"
changes the settings as follows:
• Mute – Muting
• ATT – Attenuation
• Normal – Volume does not change
Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use Hardware Volume to
control the navigation voice guidance vol-
ume.
Adjusting a blurry or low con-
trast screen
If the screen is blurry or the contrast is low, these
problems can be improved by adjusting the dot
clock.
1
Touch "Pixel Align" in the Initial menu.
2
Touch 4 or 6to adjust the setting.
Adjust the value so that the dashed lines
appear correctly as three separate lines.
Adjust the value between 0 and 7.
110

Other Functions

Setup adjustments

(1)
(1) System menu display
How to display the System menu

Setting the video input

You can switch the setting according to the con-
nected component.
• Select "Video" to watch video of a connected
component as AV-1 or AV-2 source.
1
Touch "AV1 Input" or "AV2 Input" in the
System menu.
Each touch of the "AV1 Input" or "AV2
Input" changes the settings as follows:
AV1 Input:
• Off – No video component is connected
• Video – External video component
• EXT – Pioneer external unit connected with
RCA video cable
AV2 Input:
• Off – No video component is connected
• Video – External video component
When a Pioneer external unit is connected
with an IP-BUS cable, select EXT. When
the audio source is EXT, the "Video
image" of the Pioneer external unit can be
displayed.
Use AV2 Input when connecting CD-
RM10 (sold separately) through the exter-
nal video component.
Page 67