Advertisement
SETTINGS KEY
Displays Settings Menu:
1 Set Time/Date
2 View Event Log
3 Reboot Keypad
4 Set User Code**
Press
1. Add a User
2. Delete a User
3. Assign Attr.
Menu options details below.
Note: For Commercial controls, some of the steps are different than described
in the following section. Refer to the system User Guide for details on setting
these options.
SETTINGS KEY FUNCTION
Set Time/Date
1. Press
to enter Settings mode and press
option.
2. Enter the Master User Code at the 'Enter Your Code' prompt and press
3. The 'Time/Date' screen appears. Press
• Use the number keys to change the time and date shown
•
= PM,
• The navigation keys to move the cursor (
• When done editing, press
View Event Log
1. Press
to enter Settings mode and press
Log' option.
2. Enter the Master User Code at the 'Enter Your Code' prompt and press
3. Press
to move forward or
4. To exit, press any key except
Reboot Keypad
1. Press
to enter Settings mode and press
(The keypad beeps and the keypad LEDs flash for several seconds.)
Set User Codes
1. Press
to enter Settings mode and press
Code' option.
2. Enter the Master User Code at the 'Enter Your Code' prompt and press
to see a user option screen.
to edit the time and date:
= AM;
to save and exit.
to move backward through events.
and
the keys.
- 2 -
**
The menu-based user code
programming feature is only
available with certain systems.
Check with the system
installer for details on features
of your system.
to select 'Set Time/Date'
= forward,
= back).
to select the 'View Event
to Reboot the keypad.
to select 'Set User
.
.
Advertisement
