Using Basic Phone Functions
Placing, Answering, and Managing Calls
Placing, Answering, and Managing Calls
NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Task
Muting and unmuting
your phone during a call
You can choose from a variety of methods to place, answer, and manage your
calls. Refer to these topics:
•
Placing a Call, page 30
•
Answering, Diverting, and Ending Calls, page 32
•
Managing Multiple Calls, page 33
Placing a Call
For information about dialing options, see
page
23.
Task
Placing a call
Instructions
Not available on Cisco SPA301
Press
to stop transmitting your audio to the
other party. For reassurance that your audio is
muted, verify that the Mute button is lit. Press the
Mute button again to resume the normal audio
functions. Note: When switching from the speaker to
the handset, mute is turned off automatically.
Entering and Editing Characters,
Instructions
1. Choose an audio device.
•
Use the handset: Lift it off hook.
•
Use the phone speaker: Press
•
Use a headset (not included): Press
2. Press a line button (optional). If you do not choose
a line button, the first button is used by default.
3. Dial an extension number or an external number.
(See instructions below in this table.)
2
.
.
30