Cisco SPA300 Series User Manual page 22
Spa300 series, spa500 series;
Hide thumbs
Also See for SPA300 Series:
- Quick start manual (3 pages) ,
- Quick reference card (2 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
Getting Started
Using the Feature Buttons
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
•
Block Caller ID: To block your caller ID for a call, press the button, and then
place the call. After you end the call, normal caller ID settings are in effect.
•
Call Park Slot: During an active call, press this button to place the call on
hold in the specified park slot, such as Park Slot 2. To unpark the call from
this phone, press this button again. You also can unpark the call from
another IP phone with the same park slot button, for example, Park Slot 2.
Alternatively, unpark the call from any IP phone by pressing
prompted, enter the specified park slot number, and then press
•
Force Night: The function depends on the day/night mode for your phone
system. Check with your phone administrator for details.
-
In a manual day/night system: Press to toggle between Day mode
(green) and Night mode (red).
-
In a system with an automated schedule: Press to temporarily
override the schedule. The button is red. Press again to resume the
normal schedule. The button is green.
•
Intercom: Press this button to initiate a two-way call to the phone speaker
of the specified user. Press again to end the intercom call.
•
Individual Pickup: When the button is flashing, press it to pick up a ringing
call on the specified extension.
•
Unused Button: Optionally, use an unlabeled button as a personal speed
dial button.
-
To add a personal speed dial: Press and hold the unlabeled button for
three to four seconds. When the Define Speed Dial window appears,
enter a Name for the button label. Press the down-arrow navigation
button, and then enter the PhoneNo. Press
speed dials can be overwritten by administrative changes on your
phone.
-
To use a personal speed dial: Press this button to immediately place a
call to the specified user or telephone number. During an active call, you
can press this button to immediately transfer the call. This is a blind
transfer, with no opportunity to talk to the other party or to cancel the
transfer.
1
. When
Unpark
Dial
. Note: Personal
Save
.
22
Advertisement
Table of Contents
