Overlay Data - Lowrance Mark-4 HDI Operation Manual

Overlay Data

Used to select data shown on the Sonar, DownScan
and Chart pages.
Overlay
data
Show
Enables/disables the display of
overlay data, allowing you to
remove overlay data from the
screen without deleting the current overlay data
configuration.
Configure
Allows you to select/customize overlay data.
Pages | Mark-4 & Elite-4 HDI
To add overlay data:
1. From the Sonar, Chart or DownScan
page, press MENu.
2. Select Overlay data and press ENTEr.
3. Select Configure and press ENTEr.
4. Press Menu and select Add. Press
ENTEr.
5. Select a category and press ENTEr.
6. Select the desired data and press
ENTEr.
7. Repeat Steps 5 and 6 to add more data.
8. Press MENu and select Return to
Overlays. Press ENTEr.
9. Press MENu, select Done Configuring
and press ENTEr.
14