Epson EMP-6100 User Manual page 34

List of Functions
Sub Menu
Air Filter Setting You can set information regarding the replacement time for the air filter.
Alarm Timer: You can set whether you are informed (On) or not (Off) when it is time to replace the air filter.
Make sure you set this to "On" if you are using the smoke type air filter.
Timer: You can set whether or not to display a message indicating length of use.
The projector automatically detects the type of air filter installed and sets the appropriate time for filter replacement. However, you can set the
message to warn you earlier depending on the projector's environment to give you more notice that maintenance will soon be required.
Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. s
Screen ID: When performing "Image Correction" for "Multi-screen" by using one remote control for multiple projector's, you can define which
projector to use when individual IDs are set.
The IDs set here are only effective during "Image Correction" for "Multi-screen".
Image Correction: You can make the following adjustments.
Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each level 1 to 5 you can adjust "Brightness
Correct." and "Color Correct.".
Brightness Correct.: Corrects the difference in the brightness of each product.
Color Correct. (G/R) / Color Correct. (B/Y) :Corrects the difference in the colour of each product.
Language You can set the language for message displays.
Reset You can reset "Display
To return all menu items to their default settings, see s
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s
*2 To download EMP Monitor software, go to http://www.epson.com, select your local Epson Web site and then select the support section. EMP Monitor is software
that uses a computer to monitor and control the state of one or more projectors on a network.
You will need a serial W IP conversion adapter and cable to connect an EMP-6000 to a network so that you can monitor it with EMP Monitor. You can check
product information and operation compatibility at the homepage address mentioned above.
*3 Except for "High Altitude Mode".
*1 *3
", "Operation ", and "Air Filter Setting" in the "Extended" menu to their default settings.
p.23
Function
p.39
34
p.19