Chapter 11 Static Route Screens; Static Route Overview; Figure 45 Example Of Static Routing Topology - ZyXEL Communications P-335 Plus User Manual

This chapter shows you how to configure static routes for your ZyXEL Device.

11.1 Static Route Overview

Each remote node specifies only the network to which the gateway is directly connected, and
the ZyXEL Device has no knowledge of the networks beyond. For instance, the ZyXEL
Device knows about network N2 in the following figure through remote node router R1.
However, the ZyXEL Device is unable to route a packet to network N3 because it doesn't
know that there is a route through the same remote node router R1 (via gateway router R2).
The static routes are for you to tell the ZyXEL Device about the networks beyond the remote
nodes.

Figure 45 Example of Static Routing Topology

Chapter 11 Static Route Screens

C
H A P T E R
Static Route Screens
P-335 Plus User's Guide
11
101