Technical Specifications - HP 5500 EI series Specifications

QuickSpecs

Technical Specifications

HP 5500-24G EI Switch with 2 Interface Slots (JD377A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
1 RJ-45 serial console port
Supports a maximum of 24 autosensing 10/100/1000 ports
Dimensions
Weight
256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
10 Gbps Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Maximum heat
dissipation
Voltage
Maximum power rating
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
DA - 13808 North America — Version 27 — January 16, 2014
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
8.82 lb (4 kg)
< 3.2 µs
< 2.6 µs
107.2 million pps
144 Gb/s
12000 entries (IPv4)
32ºF to 113ºF (0ºC to 45ºC)
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
5% to 95%, noncondensing
ISO 7779
50/60 Hz
375 BTU/hr (395.63 kJ/hr)
100-240 VAC
110 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
HP 5500 EI Switch Series
Page 19