Internal Power Supplies - HP 5500 EI series Specifications

QuickSpecs
Configuration

Internal Power Supplies

(JD374A and JG249A Switches Only ) (std 1 // max 2) User Selection (min 0 // max 1) per switch enclosure
HP 5500 150WDC Power Supply
HP 5500 150WAC Power Supply
includes 1 x c13, 910w
PDU CABLE NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 2 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in AMS, Taiwan, and Japan)
Note 3 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.
Note 4 Not supported on JD377A, JG241A, JD375A, JG240A, JG251A, JG250A, JG252A, JG253A
Remarks: If Power Supply is added to switch with power supply, then Switch and Power Supply localization must match.
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Switch Enclosure Options
External Redundant Power Supplies
DA - 13808 North America — Version 27 — January 16, 2014
HP 5500 EI Switch Series
JD366A
See Configuration
Note: 4
JD362A
See Configuration
Note:1, 2,3,4
JD362A#B2B
JD362A#B2C
JD362A#B2E
Page 14