HP EliteDesk 800 G1 series Specifications page 35

QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
HP 500-GB 7.2K rpm SATA 6.0Gb/s 3.5" Hard Disk Drive
Capacity
Rotational Speed
Interface
Buffer Size
Logical Blocks
Seek Time (typical reads,
includes controller overhead,
including settling)
Height (nominal)
Width (nominal)
Operating Temperature
HP 120-GB Solid State Drive
Unformatted Capacity
Architecture
Interface
Dimensions (W x H x D)
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
* For solid state disk drives, GB means 1 billion bytes. 128GB is the unformatted capacity of this drive before a portion of the drive is
reserved for flash management features. Actual capacity will vary by content
** The product achieves a mean time between failure (MTBF) based on population statistics not relevant to individual units.
500,107,862,016 bytes
7,200 rpm
Serial ATA 3.0 (6.0 Gb/s)
16 MB
976,773,168
Single Track: 2.0 ms
Average: 11 ms
Full-Stroke: 21 ms
1 in/2.54 cm
Media diameter: 3.5 in/8.89 cm
Physical size: 4 in/10.2 cm
41° to 131° F (5° to 55° C)
120 GB
Multi Level Cell (MLC) NAND Flash with wear leveling 10 channel controller
Serial ATA 2.0 (3.0 Gb/s)
2.74 x 0.37 x 4 in/6.98 x 0.95 x 10.2 cm
0.18 lb/80 g
Sustained Sequential Read:
Sustained Sequential Write:
Random Read:
Random Write:
Read:
Write:
DC power requirement:
Total power consumption:
35TB written, up to 20GB/day for 5 years
Operating Temperature:
Relative Humidity:
Maximum Wet Bulb
Temperature (operating):
Shock:
DA - 14653 North America — Version 16 — December 12, 2013
HP EliteDesk 800 G1 Series Business Desktop
Up to 250 MB/s
Up to 70 MB/s
Up to 35K IOPs
Up to 6.6K IOPs
65-ms
85-ms
5 VDC 5%-100 mV ripple p-p
0.15W (active); 0.075W (idle)
32° to 158° F (0° to 70° C)
5% to 95%
84° F (29° C)
1,500 G/0.5-ms
Page 35