QuickSpecs
Configuration
Note 10
This HPN CTO switch cannot be factory racked. (Future Release)
Note 11
If the Router Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Router Chassis
and integrated to the JG500A - HP MSR CTO Enablement. (Min 1/Max 1 Router per SSP)
Internal Power Supplies
Internal Power Supplies included
Modules
SIC Modules
HP MSR 4-port 10/100 SIC Module
None
HP MSR 9-port 10/100 DSIC Module
HP MSR 1-port 10/100 SIC Module
None
HP 1-port 100Mbt SFP SIC Router Module
min=0 \ max=1 SFP Transceivers
HP MSR 1-port 10/100/1000 SIC Module
min=0 \ max=1 SFP Transceivers
HP MSR 2-port FXO SIC Module
None
HP MSR 1-port FXO SIC Module
None
HP MSR 2-port FXS SIC Module
None
HP MSR 1-port FXS SIC Module
None
DA - 13813 North America — Version 13 — November 22, 2013
HP MSR20 Series
JD573B
See Configuration
Note:1
JD574B
See Configuration
Note:2, 3, 15, 16
JD545B
See Configuration
Note:1
JF280A
See Configuration
Note:1, 4
JD572A
See Configuration
Note:1, 5
JD558A
JD559A
JD560A
JD561A
Page 8