Bluetooth One Touch Connection Via Nfc - Sharp XL-HF202PHS Quick Start Quide

4
Turn on your system
Press the ON/STAND-BY button to turn the power on.
5

Bluetooth one touch connection via NFC

This audio system supports NFC-enabled device with Android 4.1,
Jelly Bean and higher.
NFC tag set up
The NFC tags can be placed anywhere convenient to you. The
velcro tapes supplied will help to secure the tags onto the desired
location.
Caution :
Make sure that the NFC tag is placed on a flat and level surface.
If you choose not to use the velcro tape, do not place the
NFC tag near metal surface to avoid connection interference
during tagging.
Keep all small parts away from children as they may be
accidentally swallowed.
1
Peel the separator off the velcro tape (loop type) and stick it on a
desired surface.
separator
velcro tape
(loop type)
2
Peel the separator off the velcro tape (hook type) and stick it to
the rear of the NFC tag. Then place the tag onto the desired
location.
velcro tape
separator
(hook type)
rear view of the NFC tag
6
Listening on Android
1
Insert the connector to the device.
Device
(Smartphone/Tablet)
Connector
2
Connect the device to the main unit via USB connector.
TM
devices
USB connector
(not supplied)
NFC connection for audio playback
Check that :
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.
1
Touch your device to the supplied NFC tag.
2
A pop-up window asking whether to proceed
with the Bluetooth connection appears on
the device. Select <YES>.
The 'connected' message appears when
the connection is complete.
3
Playback will start automatically. Otherwise, press play (on
remote control or source device).
Sound will be heard from the speakers of this unit via audio
streaming.
Your device and NFC tag must be within 10 meters from the
unit.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Note :
To listen to audio via Bluetooth connectivity without NFC tag -
refer "Pairing with other Bluetooth source devices" on page 8
of the operation manual.
To disconnect, simply touch your device to the tag again.
Android device playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the USB button (remote control) or FUNCTION button
repeatedly (main unit) to select USB function.
3
Connect the device (Smartphone/Tablet) to the unit.
4
Press the play button (on main unit, remote control or device).
To disconnect the Android device
1
Quit the application (apps).
2
Disconnect the device from the USB terminal.
NFC tag