Husqvarna RZ46i Operator's Manual page 29

5. Move the steering controls outward to the locked
(outer) neutral position.
6. Move the throttle lever to the full throttle position.
NOTE: There is a detent at the full throttle position
to aid in setting the control.
If the temperature is below 32
throttle lever up to the cold weather (snowflake)
starting position.
When the engine has started, move the throttle
lever back to full throttle detent and allow the
engine to warm up for a short period before
operating the unit. Failure to move the throttle
from the cold weather starting position will result in
poor engine performance, smoke and spark plug
fouling.
OPERATION
F, move the
O
Place controls in neutral position
Full throttle position
8058-190
8058-248
29