ZyXEL Communications G-220 v2 User Manual page 68

ZyXEL G-220 v2 User's Guide
Table 14 Station Mode: Adapter (continued)
LABEL
Power Saving
Mode
WMM QoS
WPS (Wi-Fi
Protected Setup)
PBC
PIN
Manual Input
Start
OTIST (One-
Touch Intelligent
Security
Technology)
Setup Key
Start
Save
68
DESCRIPTION
Select Maximum Power Save or Fast Power Save to save power (especially for
notebook computers). This forces the G-220 v2 to go to sleep mode when it is not
transmitting data.
When you select Continuous Access Mode, the G-220 v2 will never go to sleep
mode.
Note: At the time of writing this field is not available on Windows
Vista.
WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you to prioritize wireless
traffic according to the delivery requirements of individual services. To do this, you
must enable WMM QoS on both the AP and wireless clients.
Select this check box to enable WMM QoS on the G-220 v2.
Note: At the time of writing this field is not available on Windows
Vista.
Select this to enable Wi-fi Protected Setup on the G-220 v2.
Select this to use the PBC (Push-Button Configuration) WPS mode. When you use
the PBC mode you do not use a PIN.
Select this to use the PIN (Personal Identification Number) WPS mode. Use this
option when you want to enter the G-220 v2's PIN in another WPS-enabled device.
The PIN will be displayed in the field on the right. Click PIN again to generate a
new PIN.
Select this check box to manually enter the PIN into the field on the right. This
could be a PIN from another WPS-enabled device or a PIN you will type into the
other WPS-enabled device.
Click Start once you have selected the PBC or PIN settings. A screen will appear
that states the WPS is in progress. You must now start WPS on the other WPS-
enabled device within two minutes or the connection will time out. If the two WPS
devices connect you will receive a successful connection message.
Select this check box to enable OTIST.
Enter the same setup key (up to eight printable characters) as the ZyXEL AP or
wireless router to which you want to associate. The default OTIST setup key is
"01234567".
Note: If you change the OTIST setup key on the ZyXEL AP or
wireless router, you must also make the same change here.
Click Start to encrypt the wireless security data using the setup key and have the
ZyXEL AP or wireless router set your G-220 v2 to use the same wireless settings
as the ZyXEL AP or wireless router. You must also activate and start OTIST on the
ZyXEL AP or wireless router all within three minutes.
Click Save to save the changes back to the G-220 v2 and return to the Link Info
screen.
Chapter 4 Wireless Station Mode Configuration