McAfee® IntruShield® IPS 4.1
IntruShield Sensor 3000 Product Guide
Audience
This guide is intended to be used by network technicians and maintenance personnel
who are responsible for installing, configuring, and maintaining this IntruShield
sensor, but not necessarily familiar with IPS-related tasks, the relationship between
tasks, or the commands necessary to perform particular tasks.
Conventions used in this guide
This document uses the following typographical conventions:
Terms that identify fields, buttons,
tabs, options, selections, and
commands on the User Interface
(UI) are shown in
font.
Menu or action group selections
are indicated using a right angle
bracket.
Procedures are presented as a
series of numbered steps.
Names of keys on the keyboard
are denoted using UPPER CASE.
Text such as syntax, keywords,
and values that you must type
exactly are denoted using
Courier New font.
Variable information that you must
type based on your specific
situation or environment is shown
in italics.
Parameters that you must supply
are shown enclosed in angle
brackets.
•
Chapter 4: Attaching Cables to the I-3000 Sensor (on page 21) describes
how to attach monitoring and response cables to the sensor, and how to
cable the sensor to operate in various operating modes.
Convention
Arial Narrow
bold
Example
Service
The
field on the
name of the requested service.
My Company > Admin Domain > View Details.
Select
Configuration tab
1. On the
Press ENTER.
Type: setup and then press ENTER.
Type: sensor-IP-address and then press ENTER.
set sensor ip <A.B.C.D>
vi
Preface
Audience
Properties
tab specifies the
Backup
, click
.