McAfee IIP-S03K-NA-100I - IntruShield 3000 Sensor Appliance Product Manual page 12

McAfee® IntruShield® IPS 4.1
IntruShield Sensor 3000 Product Guide
Power A
Power B
Note:
Management Port
Speed
Management Port
Link
Sys
Fan OK
Fan 1
Fan 2
Fan 3
Temp
Flash
Gigabit Ports Act
Gigabit Ports Link Green
Response Port
Speed
LED Status
Green
Amber
Green
Amber
If a power supply is not present, both green and amber LEDs are off.
Amber
Off
Green
Off
Green
Amber/blinking
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Green
Off
Amber
Off
Off
Amber
Off
4
An introduction to IntruShield sensors
What is an IntruShield sensor?
Description
Power Supply A is functioning.
Power Supply A is not functioning.
Power Supply B is functioning.
Power Supply B is not functioning.
The port speed is 100 Mbps
The port speed is 10 Mbps
The link is connected.
The link is disconnected.
Sensor is operating.
Sensor is booting.
All three fans are operating.
Indicates one or more fans have failed.
Fan 1 is not operating.
Fan 1 is operating.
Fan 2 is not operating.
Fan 2 is operating.
Fan 3 is not operating.
Fan 3 is operating.
Inlet air temperature measured inside chassis is
normal. (Chassis temperature OK.)
Inlet air temperature measured inside chassis is
too hot. (Chassis temperature too hot.)
Activity on external compact flash. (For
example, the Fail-Open Controller has been
inserted)
No activity on external compact flash.
Data transferring.
No data transferring.
The link is connected.
The link is disconnected.
The port speed is 100 Mbps.
The port speed is 10 Mbps.