Nfs Screen - ZyXEL Communications NSA310S User Manual

Chapter 10 Packages
Table 57 Network > DyDNS
LABEL
External Address
Configuration
Enable DyDNS
Service Provider
Hostname
Username
Password
Password (Confirm)
Apply
Reset

10.5 NFS Screen

Use this screen to enable and configure Network File System (NFS) settings on your NSA.
NFS is a client/server distributed file service that provides transparent file sharing for network
environments. This allows shared folders in your NSA to be accessible like a local folder in a user's
computer.
Click Network > NFS to open the following screen.
Figure 109 Network > NFS
The following table describes the labels in this screen.
Table 58 Network > NFS
LABEL
NFS Service
Enable NFS Server
Disable NFS Server
Add NFS Share
220
DESCRIPTION
This shows the IP address of the NSA that can be accessed in the Wide Area Network
(WAN). Note that this is not assigned by the DyDNS server.
Select this to use dynamic DNS.
You need to have registered a dynamic DNS account with a service provider such as
www.dyndns.org. The Dynamic DNS service provider will give you a password or key.
Select your Dynamic DNS service provider.
Enter your host name provided by the Dynamic DNS service.
Enter your user name for your DNS account.
Enter the password assigned to your DNS account.
Confirm the password you entered.
Click this to save your changes.
Click this to clear the fields.
DESCRIPTION
Click this to employ NFS in your NSA.
Click this to stop using NFS.
This makes all NFS shares unavailable.
Click this to add an NFS share.
Refer to Section 10.5.1 on page 221 for the Add NFS Share screen.
Media Server User's Guide