Toshiba e-studio355 Troubleshooting Manual page 65

1.TROUBLESHOOTING FOR THE HARDWARE
Saddle Stitch Finisher MJ-1025
1
Open the front cover of the finisher.
2
Pull out the stapler unit holding the green handle.
3
Turn the top green knob clockwise until the triangle
mark and the square mark are aligned as shown in the
figure on the right, so that the stapler is pulled out
toward you.
4
Take out the staple cartridge holding its green portion
on both sides.
5
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 63