Toshiba e-studio355 Troubleshooting Manual page 28

1 TROUBLESHOOTING FOR THE HARDWARE
6
Remove the jammed paper by turning the knob.
7
Close the Hole Punch Unit cover.
8
Close the Bridge Kit cover.
9
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right
side of the lever.
Jam in the lower receiving tray.
1
Holding the lever, open the upper receiving tray of the
finisher.
26 Clearing a Paper Jam