Foxconn Q57M Series User Manual page 91

English manual.
Table of Contents

Advertisement

4. After exiting from "RAID Level", it goes directly to "Stripe Size" item. Because all
four disks are selected for RAID10, so there is no need to go to Disks option.
5. Use Up or Down arrow key to select the desired strip size when entering "Strip
Size" menu. The default value is 64K.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
6. In "Capacity" item, use the default value, and press <Enter>. The default value is
twice the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
7. Select "Create Volume" and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volume :
ID
Name
0
TryRAID10
Physical Disks:
Port Drive Model
0
Hitachi HDS72161
1
ST380811AS
2
SAMSUNG HD161HJ S0V3J9APA30524
3
ST380815AS
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[
CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
The following are typical values:
[↑↓]-Change
[TAB]-Next
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021
Copyright(C) 2003-09 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
1. Create RAID Volume
[
DISK/VOLUME INFORMATION
Level
RAID10(0+1)
Serial #
PVF904Z21G2JZM
5PS1TAGW
5RW1CA37
[↑↓]-Select
]
TryRAID10
RAID10(RAID0+1)
Select Disks
128K
64KB
149.1 GB
N/A
Create Volume
[
HELP
]
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
[ESC]-Previous Menu
[
MAIN MENU
]
4. Recover Volume Options
5. Acceleration Options
6. Exit
]
Stripe
Size
64KB 149.1GB
Size
149.0GB
74.5GB
149.0GB
74.5GB
[ESC]-Exit
[ENTER]-Select Menu
84
[ENTER]-Select
Status
Bootable
Normal
Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
Member Disk(0)
Member Disk(0)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents