Health - Foxconn H61AP Series User Manual

BIOS SETUP

Health

Main
Case Open Warning
CPU Temperature
System Temperature
CPU Fan Speed
System Fan Speed
CPU Vcore
DRAM Voltage
+12V SYS
+5V SYS
VBAT
CPU Warning Temperature
CPU Shutdowm Temperature
CPU Smart Fan Control
System Smart Fan Control
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceed-
sthe set value, the system will shut down automatically.This function works only when your
operating system is supporting ACPI.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Default value is [Disabled].
► System Smart Fan Control
This option is used to enable or disable system smart fan function. Default value is
[Disabled].
40
f-center Advanced Boot
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Power Health Security
[Disabled]
Enabled Case Opening Warn-
ing and open chassis,
Instruction Alarm will
: +39 ˚C
appear. If don't enter
: +35 ˚C
bios setup and disabled
: 3026 RPM
Case Opening Warning one
: N/A
time, Instruction Alarm
: +1.200 V
don't clear, it will
: +1.608 V
appear all the time.
: +12.300 V
: +5.097 V
: +3.328 V
[Disabled]
[Disabled]
→ ←: Select Screen
[Disabled]
↑ ↓/Click: Select Item
[Disabled]
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Save&Exit