Foxconn H61AP Series User Manual page 22

Audio Header : f_AUDIO
The audio connector supports HD Audio standard.
It provides the Front Audio output choice.
Speaker Header : SPeAKeR
The speaker connector is used to connect speaker
of the chassis.
USB Headers : f_USB1/2/3
In addition to the USB ports on the rear panel,
this product also provides 10-pin USB head-
ers on its motherboard. By connecting through
USB cables with them, user can quickly expand
another USB ports on the front panel.
SPDIf OUT Header : SPDIf_OUT
The connector is used for SPDIF output.
Serial ATA Connectors : SATA_1/2/3/4/5/6
The Serial ATA connector is used to connect with
SATA Hard Disk or CD devices which support this
feature. The SATA_1/2/3/4 allows up to 3GB/s
data transfer rate, the SATA_5/6 support SATA
3.0 specification, and allows up to 6GB/s data
transfer rate.
1 2
VCC VCC
D- D-
D+ D+
GND GND
EMPTY GND
9 10
F_USB1/2/3
HARDWARE INSTALLATION
1 2
A_MIC2_L
A_MIC2_R
A_LINE2_R
SENSE_SEND
A_LINE2_L
9 10
F_AUDIO
PWR
EMPTY
NC
SPKJ
SPEAKER
SPDIF_OUT
1
GND
TX+
TX-
GND
RX-
RX+
GND
SATA_1/2/3/4 SATA_5/6
AUD_GND
PRESENCEJ
SENSE1_RETURN
EMPTY
SENSE2_RETURN
1
2
3
4
1
+5V
2
EMPTY
3
GND
4
SPDIF_OUT
1
GND
TX+
TX-
GND
RX-
RX+
GND
15