Foxconn G45MG Series User Manual page 22

!
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
Audio Connector : f_AUDIo
The audio connector supports HD Audio standard. It
provides the Front Audio output choice.
S/PDIf oUT Connector : SPDIf_oUT
The connector is used for S/PDIF output.
Floppy Disk Drive Connector : FLOPPY
This motherboard includes a standard floppy disk
drive (FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
IrDA Connector : IR
This connector supports infrared wireless trans-
mitting and receiving device.
IDe Connector : PIDe
With the provided Ultra DMA IDE ribbon cable, you
can connect to any IDE type of hard disk and CD/
DVD ROM/RW drive.
1 +5V
2
EMPTY
3
IRRX
4
GND
IRTX
5
IR
15
15
Connect a 4-pin
power plug
1 2
PORT1_L AUD_GND
PORT1_R
PRESENCEJ
PORT2_R
SENSE1_RETURN
SENSE_SEND
EMPTY
PORT2_L
SENSE2_RETURN
9 10
F_AUDIO
1
+5V
EMPTY
2
SPDIF_OUT
3
GND
4
SPDIF_OUT