Overclocking - Foxconn Destroyer User Manual

Aegis is a very important system monitoring program, so when
you click cross icon on it, Aegis only goes to notification area of
the system tray, but does not stop running. If you really want to
close it, you must right click on it on the notification area, and
select exit to make it.
Open : Open Aegis Panel main panel on the screen.
Configure : Open Aegis Panel and directly enter configure mode.
Exit : Close Aegis program.

2. Overclocking

Click on "Foxconn" button to open/close the display screen. The information of CPU, memory,
and PCIE clocks are displayed.
Click on Control Panel button, and its panel appears. Then click on OC button to visit
Overclocking menu which allows you to overclock your CPU and PCIE bus manually.
OC button
52
Open/Close
screen
Control Panel
button