Voltage Control - Foxconn D250S User Manual

4.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and ena�le the alert function.
5. Voltage Page - Voltage Control (Optional)
This page lets you set CPU voltage, memory voltage and North Bridge voltage manually. CPU
voltage can �e stepped up�down �y a unit of 1�.�mV, while memory is 0.0�V�step, and North
Bridge is 0.04V/step.
Reset the changes
Show current FAN1
fan rpm value
Go to Voltage page
Apply the changes
Set low limit rpm �y
dragging the lever
47
Ena�le alert function
when the FAN1 fan
runs slower than low
limit rpm value
Show current low limit
rpm value of FAN1 fan
Select the option
you want to set
Adjust �y manual