Pantech Breakout User Manual page 47

ADDING NEW INFORMAITON TO EXISTING CONTACT
1 Touch Phone
2 Enter a telephone number and touch Save in the middle of the screen.
3 Touch Select a contact, and select and touch a contact to add information.
4 Touch the number or Add more field:
Touch the number that appears on the top of the list if you want to replace the number with
x
one that you have entered.
Touch Add more field if you want to add the number that you have entered, in an additional
x
field.
5 Touch Save when you finish editing contact.
TALKING THROUGH THE SPEAKER
1 Touch Speaker during a call. A red bar appears under Speaker when the function is on. The speaker
does not work when a headset it connected to the Breakout™.
2 Touch Speaker if you want to stop using the function.
Note If the proximity sensor is working, speakerphone would run automatically when you take your face off the
Breakout™ for a few seconds.
TALKING WITH Bluetooth TECHNOLOGY
1 Touch Bluetooth during a call. A red bar appears under Bluetooth when the function is on.
2 Touch Bluetooth if you want to stop using the function.
Note Refer to the relevant manual of the Bluetooth headset for more information.
from the Home screen.
46
CALLS AND MESSAGES