Pantech Breakout User Manual page 107

ADDING A Wi-Fi NETWORK
1 Touch Apps
2 Touch Wireless & networks > Wi-Fi settings.
3 Touch Wi-Fi to activate the technology.
4 Touch Add Wi-Fi network.
5 Enter Network SSID and select the security type among Open, WEP, WPA/WPA2 PSK and 802.1x
EAP. Aside from Open, you must enter a password for the network.
6 Touch Save.
DISCONNECTING TO A Wi-Fi NETWORK
1 Touch the network that is connected to the Breakout™.
2 Touch Forget to disconnect with the network.
Note You can also disconnect to the Wi-Fi network by pressing and holding the network and touching Forget
network.
SETTING ADVANCED FEATURES
1 Touch Apps
2 Touch Wireless & networks > Wi-Fi settings.
3 Touch Wi-Fi to activate the technology.
4 Press the Menu Key B and touch Advanced.
5 For advanced settings,
Touch Regulatory domain, and select and touch channels for the domain.
x
Touch Wi-Fi sleep policy and specify when the Breakout™ should switch from the Wi-Fi network
x
to mobile network.
from the Home Screen. Touch Settings
from the Home Screen. Touch Settings
.
.
106
CONNECTIVITY