Disconnect; Remote Access - GE 29870 Series User Manual

R A
EMOTE CCESS
You can access your answerer from any touch-tone
phone by entering your 3-digit security code (the
default security code is 123, but you can change it.) Be
aware that remote functions do not work with rotary or
push-button pulse-dialing phones. You can cut out the
wallet-size remote card near the back of the User's
Guide so you know the touch-tone commands when
you're picking up messages from another location.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting,
enter your 3-digit security code. To bypass the
greeting, you can enter your 3-digit security code
any time while the greeting is playing.
3. The unit plays the remote menu after the correct
security code has been entered. Menu selections can
be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it
is turned off or the memory is full. To access the
answerer, enter the 3-digit security code after the
beep. If memory is full, play messages and erase
some of them to restore memory. If the answerer is
off, press 2 to turn it on.
NOTE: After the unit plays the remote menu, it
will wait 20 seconds for a command, then

disconnect.

19