Troubleshooting Guide - Honeywell CL48PM Owner's Manual

TROUBLESHOOTING GUIDE

PROBLEM
No discharge of air
Not Cooling / Unit is
making noise
Odor omission
POSSIBLE CAUSE
Cord is not plugged in.
Power is not on.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or Calcium
deposits on blower.
When the Cooler is new.
If the Cooler has been used.
SOLUTION
Make sure power cord is
plugged in and the supply
switch is on.
Turn the unit ON by pressing
buttons on the control panel.
On Control Panel, Turn COOL
FUNCTION to "ON".
Refill water tank.
Contact service center.
When the unit is used for the
first time, the Honeycomb
Cooling Media will have an
odor, which will dissipate
within a week of initial use.
There may be an algae issue,
Replace the Honeycomb Cooling
Media. Contact service center.
14