Honeywell CL48PM Owner's Manual

Honeywell CL48PM Owner's Manual

Portable evaporative air cooler
Hide thumbs Also See for CL48PM:

Advertisement

Portable Evaporative Air Cooler
OWNER'S MANUAL
Read and save these instructions before use
Model: CL48PM
Power rating: 130 Watts
Voltage rating: 230 Volt, 50Hz
Made in P.R.C.

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell CL48PM

  • Page 1 Portable Evaporative Air Cooler OWNER’S MANUAL Read and save these instructions before use Model: CL48PM Power rating: 130 Watts Voltage rating: 230 Volt, 50Hz Made in P.R.C.
  • Page 2: Quick Start Guide

    QUICK START GUIDE Fill with water and plug into a standard power outlet. Note: Please make sure the household power voltage matches the product specifications. Place near an open door or window. Note : Evaporative air cooler requires cross ventilation. Turn ON and enjoy the cooling breeze.
  • Page 3: Table Of Contents

    INDEX Read all instructions carefully before setting up and operating the cooler, and please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow these instructions may damage and/or impair its operation and void the warranty.
  • Page 4: Thank You

    THANK YOU Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For optimum cooling from your cooler, fill the water tank to maximum level and load ice inside the ice compartment before you turn on your air cooler.
  • Page 5: User Tips

    USER TIPS Energy efficient, No compressor Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep costs low. Warm air is drawn into the cooler through a dust and odor-reducing carbon filter and enters the Honeycomb Cooling Media. Water pumped from the tank pours over the honeycomb media. As the warm air passes through the media, the water absorbs the heat, naturally cooling and humidi- fying the air.
  • Page 6 USER TIPS The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low. The evaporative air cooler should not be used in enclosed spaces.
  • Page 7: Safety

    SAFETY READ AND SAVE THESE INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed: Your cooler runs on 230 Volt AC, 50 Hz current. Check the • household voltage to ensure it matches the appliance's rate 230 Volt AC 50Hz specification.
  • Page 8 SAFETY • DO NOT attempt to repair or adjust any electrical or mechani- cal functions of the cooler, as this may void the warranty. • DO NOT cover the air inlet or outlet on the appliance as this may cause motor damage. DO NOT insert or allow objects to enter any ventilation or •...
  • Page 9: Parts Description

    PARTS DESCRIPTION 1 Manual Water / Ice Inlet 9 Mechanical Control Panel 2 Handle 10 Right Honeycomb Panel 3 Left Honeycomb Panel 11 Continuous Water Inlet 4 Lever for Horizontal Louvers 12 Water Drain Plug 5 Water Tank 13 Back Honeycomb Panel 6 Casters 14 Power Cord &...
  • Page 10: Use & Operation

    USE & OPERATION CONTROL PANEL NOTE: Speed control may be marked as High / Med / Low in certain units.
  • Page 11: Control Knobs

    USE & OPERATION CONTROL KNOBS SPEED / ON - OFF Connect to the power supply and turn the SPEED knob. The fan will start. Change the speed from 1 for Low to 2 for Medium to 3 for High. To switch the unit OFF, turn the SPEED to “0”. SPEED COOL Turn the COOL knob to ON to start the cooling.
  • Page 12: Filling Water

    USE & OPERATION CAUTION Unplug from power when refilling. FILLING WATER Water can be filled into the air cooler by: Water / Ice compartment (Manual Refill) Water / ice can be put into the tank though the top opening. There is a hole for water to flow into the tank. Continuous water supply (Auto Refill) Connect a garden hose to the continuous water supply inlet.
  • Page 13 USE & OPERATION FILLING WATER (CONTINUOUS WATER SUPPLY CONNECTION) Connect water pipe to the continuous water supply connector located on the lower left side panel. Secure the connector with the pipe so that there is no leakage and turn on the water supply.
  • Page 14: Cleaning & Maintenance

    CLEANING & MAINTENANCE IMPORTANT • The cooler is supplied with Honeycomb Cooling Media. • The cleaning frequency for the Honeycomb media depends on local air and water conditions. In areas where the mineral content of water is high, mineral deposits may build up on the Honeycomb Cooling Media and restrict air flow.
  • Page 15 CLEANING & MAINTENANCE DRAINING AND CLEANING THE WATER TANK • Turn the power “off” and disconnect the air cooler from the power supply. • Move the unit to a location where it can be drained. Remove the cap from the water drain plug and allow the tank to empty (see parts description on page 7).
  • Page 16: Troubleshooting Guide

    TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air Cord is not plugged in. Make sure power cord is plugged in and the supply switch is on. Power is not on. Turn the unit ON by pressing buttons on the control panel. Not Cooling / Unit is Pump is not turned ON.
  • Page 17: Technical Specifications

    TECHNICAL SPECIFICATIONS MODEL NO. CL48PM Voltage 230V 50Hz Frequency 130 Watts Wattage Water Tank Capacity 40 Litre Cooling Media Honeycomb Product Dimension 600 (L) x 490 (W) x 830 (H) 13.3 Kg Net Weight ELECTRICAL WIRING DIAGRAM...
  • Page 18: Service And Warranty

    © 2012 AirTek International Corporation Limited The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representation or warranties with respect to this product. Manufactured by AirTek International Corporation Limited.

This manual is also suitable for:

Cl40pm

Table of Contents