GE FCM5 Owner's Manual & Installation Instructions page 9

■
A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through
the exterior cabinet walls.
■
The sound of the high-efficiency compressor motor.
Temperature control
in position.
Freezer is unplugged.
The fuse is blown/circuit
breaker is tripped.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control
set too cold.
Door/lid left open.
Too frequent or too long
door/lid openings.
Temperature control
set too cold.
Inadequate air circulation
space around cabinet.
Fast Freeze switch is in the
position (on some models).
Floor may be weak, causing
freezer to vibrate when
compressor is on.
Cabinet is not positioned
solidly on floor.
Door/lid left open.
Too frequent or too long
door/lid openings.
• Move the control to a temperature setting.
• Push the plug completely into the outlet.
• Replace fuse or reset the breaker.
• Check to see if package is holding door/lid open.
• See
• Check to see if package is holding door/lid open.
• See
• See
• See
• Placing 2 X 4's (51 mm X 102 mm) under the length of
the freezer will help support it and may reduce vibration.
• See
uneven floor.
• Check to see if package is holding door/lid open.
Or use shims for
9