D-Link NetDefend DFL-210 User Manual page 319

MaxOSPFLen
MaxSKIPLen
Specifies the maximum size of a SKIP packet.
Default: 2000 bytes
MaxOSPFLen
Specifies the maximum size of an OSPF packet. OSPF is a routing protocol mainly used in larger
LANs.
Default: 1480
MaxIPIPLen
Specifies the maximum size of an IP-in-IP packet. IP-in-IP is used by Checkpoint Firewall-1 VPN
connections when IPsec is not used. This value should be set at the size of the largest packet allowed
to pass through the VPN connections, regardless of its original protocol, plus approx. 50 bytes.
Default: 2000 bytes
MaxIPCompLen
Specifies the maximum size of an IPComp packet.
Default: 2000 bytes
MaxL2TPLen
Specifies the maximum size of a Layer 2 Tunneling Protocol packet.
Default: 2000 bytes
MaxOtherSubIPLen
Specifies the maximum size of packets belonging to protocols that are not specified above.
Default: 1480 bytes
LogOversizedPackets
Specifies if NetDefendOS will log oversized packets.
Default: Enabled
319
Chapter 13. Advanced Settings