Packet Re-Assembly Settings - D-Link NetDefend DFL-210 User Manual

13.18. Packet Re-assembly Settings

13.18. Packet Re-assembly Settings
Packet re-assembly collects IP fragments into complete IP datagrams and, for TCP, reorders
segments so that they are processed in the correct order and also to keep track of potential segment
overlaps and to inform other subsystems of such overlaps. The associated settings limit memory
used by the re-assembly subsystem.
Reassembly_MaxConnections
This setting specifies how many connections can use the re-assembly system at the same time. It is
expressed as a percentage of the total number of allowed connections. Minimum 1, Maximum 100.
Default: 80
Reassembly_MaxProcessingMem
This setting specifies how much memory that the re-assembly system can allocate to process
packets. It is expressed as a percentage of the total memory available. Minimum 1, Maximum 100.
Default: 3
335
Chapter 13. Advanced Settings