Display Settings - Kenwood KDC-U7056DAB Instructions Manual

11. Display settings

11-1. Selecting a display type
Shown below are examples of display types.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "DISP&ILLUMI" > "Display Select" >
"Type Select" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
3
Select a Display type using [Control] knob.
Display type Display information
Type A Displays 3 lines of text.
Type B Displays 2 line of text.
Type C Displays the clock.
Type D Displays the Spectrum analysis.
Type E[1] Displays the Dynamic Label of Digital Radio.
Type F Turn off the display and key illumination. (5 seconds
after completion of operation)
Function of KDC-U7056DAB. Selectable only when in
[1]
the Digital Radio source.
Exiting from the Function setting mode
Press and hold [1/6].
52
|
KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL
11-2. Information display setting
You can set the side and graphic parts of the
display.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "DISP&ILLUMI" > "Display Select" using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
3
Select a display setting item using [Control]
knob.
Display Description
"Side Select" Sets the side part display for Type A, B, and D.
1 / 2 / 3 (Type A, B only)
"Graphic Select" Sets the Type D Spectrum analysis display.
1 / 2
"Status" Sets the status display (ON/OFF indicator for
each function) for Type A and B.[1]
"ON" / "OFF"
(Colored text: Factory setting)
The status display automatically turns "OFF" during aha
[1]
source and cannot be switched to ON.
4
Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
11-3. Illumination color selection
You can select the illumination color of the panel.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select "DISP&ILLUMI" > "Color Select" using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
3
Select a illumination part using [Control]
knob.
Display Part
"Color SEL All" All
"Color SEL Display" Display
"Color SEL Key" Button
4
Select a color ("Variable Scan"/ "Color1" —
"Color24"/ "User") using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
11-4. Adjusting the Illumination
color
You can adjust the illumination color of the panel.
1
Select the illumination color you want to
adjust.
Select from among "Color1" to "Color24" or
"User" with reference to <11-3. Illumination color
selection> (page 53).
2
Press and hold [Control] knob.
The RGB value of the selected illumination color is
displayed and enters the Details color adjustment
mode.
3
Set the color.
Operation type Operation
To select the color to adjust (Red, Press [E] or [F].
Green, or Blue)
To adjust color (Range: 0 – 9) Turn [Control] knob.
Determination of the adjusted color. Press [Control] knob.
The color you created can be called by selecting
"User".
Exiting from the Function setting mode
Press and hold [1/6].
|
English
53