Fax Resolution; Manual And Automatic Fax Redial - Brother MFC-8440 User Manual

Fax Resolution

When you have a document in the ADF or on the scanner glass you
Resolution
can use the
this fax only). If it is not illuminated in green, press
Resolution
Press
want.
—OR—
You can change the default setting.
1
If it is not illuminated in green, press
2
Menu
Press
3
Press
resolution you want.
Set
Press .
4
Stop/Exit
Press
Standard : Suitable for most typed documents.
Fine : Good for small print and transmits a little slower than
Standard resolution.
S.Fine : Good for small print or artwork and transmits slower
than Fine resolution.
Photo : Use when the document has varying shades of gray.
This has the slowest transmission time.

Manual and automatic fax Redial

If you are sending a fax manually and the line is busy, press
Redial/Pause
make a second call to the last number dialled, you can save time by
Redial/Pause
pressing
Redial/Pause
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial up to three times at five minutes intervals.
6 - 9 SETUP SEND
key to change the setting temporarily (for
repeatedly until the LCD shows the setting you
2 2 2
, , , .
or to select the
.
, and then press
Start
and
only works if you dialled from the control panel.
22.Setup Send
2.Fax Resolution
▲
▼
Select
Start
to try again. If you want to
.
Fax
( ).
Fax
( ).
Standard
Fine
▲▼
& Set