Table of Contents
Advertisement
PRINTING (BASIC)
2 2 2 2 2
DISPLAY ON THE MONITOR SCREEN
The setting will be displayed on the monitor screen as shown below.
(example)
1
2
1 This mark illuminates when the memorized image is displayed on the monitor.
When an image from the input signal is displayed, this mark does not illuminate. To
switch the mode, press MONITOR button.
2 These marks show the pages, A and B.
The upper mark shows page A and lower shows B. The mark of the selected page
illuminates. To switch the page, press MEMORY PAGE button.
3 This mark shows color print or black and white print. When black and white print is
selected by the B&W of COLOR in MAIN MENU, the mark illuminates.
4 These marks show the multi image print mode.
From the top to bottom, the mark indicates 1, 2, 4, 6, 16-multi image print.
When 4D mode is selected, the third mark and the marks No. 2 (page numbers)
illuminate. The replacing page illuminates in red.
2 2 2 2 2
MEMORIZING AND PRINTING AN IMAGE
(When Page Increment is set OFF in the INCREMENT menu)
1 1 1 1 1
Press MONITOR button to select "MEMORY" on the display.
•
The contents of the current memory page will be displayed.
•
If you do not want to write over the current image, press MEMORY PAGE button to
select another page.
2 2 2 2 2
Press MONITOR button to select "LIVE ".
3 3 3 3 3
When the desired image is shown on screen, press MEMORY
button.
•
The image will be captured and displayed on the screen.
4 4 4 4 4
Press PRINT button.
16
PRINTING
3
4
Advertisement
Table of Contents
