Kenmore 795.7940 Series Use & Care Manual page 15

Loosen the handle mounting fastener with a ¼" hex
wrench.
Unscrew the plug button with your fingers by rotating it
counterclockwise; it will loosen and fall free.
Plug
button
Install the plug button on the left side and install the
handle mounting fastener on the right side.
Plug
button
Using a ¼" socket wrench, loosen and remove Hinge
Pin from the Middle Hinge Bracket. Remove washer
underneath the middle hinge and set aside.
NOTE: At this point the door will be loose. Slightly lift the
door and remove it.
Fastener
Mounting
fastener
Loosen and remove the two bolts and use the Phillips head
screwdriver to remove the Middle Hinge Bracket from the
refrigerator housing. Set parts aside.
Remove the washer from the Bottom Hinge Pin.
Using a ¼" socket wrench, loosen and remove the Hinge
Pin from the Bottom Hinge. Reattach the Hinge Pin to the
opposite side of the hinge.
NOTE: This is easier to do while the hinge is still attached.
15
REFRIGERATOR INSTALLATION