Ice Storage Bin; Icemaker Cover; Door Rack And Support; Crisper And Crisper Cover - Kenmore 795.5101 Series Use & Care Manual

ICE STORAGE BIN

The ice bin stores the ice cubes made by the icemaker.
If you need to remove the ice storage bin, do so as follows:
NOTE: Use both hands to remove the ice bin to avoid
dropping it. If the ice bin does not slide into place easily,
twist the drive device slightly.
• Hold the ice storage bin as shown in the left figure
lift it while slightly pulling it out
2
1
• To assemble the ice storage bin,
pushing it in .
:
NOTE Make sure the bin is fully engaged into the auger
drive . If not, rotate the auger drive in the direction
shown by the arrow until the bin is fully engaged into the
auger drive.
ICEMAKER COVER
If you need access to the icemaker, follow these steps:
• Lift the ice shelf as shown
2
USING YOUR REFRIGERATOR
.
4
3
lift it while slightly
and pull it out .
1

DOOR RACK AND SUPPORT

Your refrigerator and freezer features racks which can
easily be arranged for packaged products.
Lift the door rack holding both sides
•
direction.

CRISPER AND CRISPER COVER

The crisper allows for better conservation of fruits and
vegetables.
• To remove the crisper compartment cover, pull out
the crisper compartment a bit to the front
front part of the cover as shown in
3
When removing the crisper compartment you will see
the water tank. Do not remove it, you can produce
water leakage. The water tank is not a removable part.
Tank
21
and pull it out in
, lift the
, and take it out .