Calibrating The Pen - Fujitsu LIFEBOOK T731 Operating Manual

Opening a context
menu
Moving the cursor -
Setting the pen
Operating system
Windows XP
Windows 7

Calibrating the pen

Before using the pen for the first time, you should calibrate it so that the cursor follows the
movements of the pen as accurately as possible. You should also always repeat the calibration
if the co-ordination between the pen and cursor movement deteriorates.
Please note: There are separate calibration programs available for calibrating
the stylus pen and for calibrating finger-based operation. In each case, use the
calibration tool described in the supplementary sheet. Do not use the calibration
tool for the stylus pen to calibrate finger-based operation.
Operating system
Windows XP
Windows 7
Fujitsu Technology Solutions
Click with the right-hand mouse
button.
Menu
You can access various pen settings under Fujitsu Pen Settings or
Tablet and Pen Settings in the Control Panel (for instance, the pressure
sensitivity).
Under Hardware and Sound – Pen and Input Devices in the Control Panel
you can change various settings for the pen (assignment and function of
the pen button).
Menu
To calibrate, run the Tablet and Pen Settings function in the Control Panel.
You need to calibrate both portrait and landscape formats.
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Working with the notebook
Touch the desired element with the
pen and leave the pen on the element
for a moment.
Place the pen tip directly on the
screen.
45