Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK T731 Operating Manual

Removing and installing components during servicing

Attaching the cover

2
1
1
► Place the cover in the correct mounting position (1).
► Fasten the screws (2).
► Replace the dust chamber cover (see "Removing and fitting the dust removal
cover (ventilation slot cover)", Page 69).

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "Installing a battery", Page 62).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
102 Fujitsu Technology Solutions