Extender Wireless Settings - NETGEAR WN3500RP User Manual

Universal Dual Band WiFi Extender – Desktop/Wallplug
Select Setup > Connect to an Existing Network. The extender scans for wireless
1.
networks, and displays a list.
If your wireless network is not on the list, the extender might be too far away from the
router. See
Positioning Your Extender
Select the radio button for your network, and click Continue.
2.
If you selected the manual option, you are prompted to type the network name (SSID)
and to enter the password to access it:
Enter your network's password or key, and click Continue.
3.
The extender joins your wireless network.

Extender Wireless Settings

You can use the Wireless Settings screen to change the network name (SSID) for the
extender's network and to set up wireless security. If you do not change these settings, the
network name is NETGEAR_EXT, and the network is open (no wireless security is set up).
If you use a wireless computer to change the extender's wireless
Note:
settings, you will be disconnected when you click Apply. To
reconnect, you have to select the new network name that you
created, and enter its password or wireless security key.
on page 7 for suggestions.
Extender Network Settings
21