NETGEAR WN3500RP User Manual page 13

Universal Dual Band WiFi Extender – Desktop/Wallplug
Wait until the Power LED
4
Use a computer or wireless device to connect to the extender. During installation, it might be
5
easier to use a computer or device that is in the same room as the extender.
For a wired connection, connect your computer or wireless device to the extender
•
with an Ethernet cable.
For a wireless connection, use a WiFi network manager to find and connect to
•
NETGEAR_EXT (the SSID) wireless network.
You can use any WiFi network manager utility on a computer or tablet to
Tip:
find and connect to the extender wireless network.
After the connection with the computer is established, the Wireless Device to Extender
LED turns green.
On your computer or wireless device, launch an Internet browser.
6
The browser displays the genie screen.
If you do not seethe genie screen, type http://www.mywifiext.net in the address field of
your browser.
The genie scans for wireless networks in your area.
Follow the genie steps to set up the extender to work with your network and to set up your
7
computer or wireless device to connect to the extender network.
These steps are explained in
turns green.
Use NETGEAR genie After Installation
Getting Started
13
on page 18.