Adjusting Loudness; Front Image Enhancer (F.i.e.) - Pioneer DEH-3910MP Operation Manual

Cd receiver
Table of Contents

Advertisement

Available languages

Available languages

Operating this unit
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
SPR-BASS—POWERFUL—NATURAL—
VOCAL—CUSTOM—FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
! If you make adjustments, CUSTOM curve
is updated.
1
Press AUDIO to select EQ.
2
Press c or d to select the equalizer
band to adjust.
EQ-L (low)—EQ-M (mid)—EQ-H (high)
3
Press a or b to adjust the level of the
equalizer band.
+6 to –6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
! If you make adjustments, CUSTOM curve
is updated.
Q=2W
Q=2N
Frequency (Hz)
1
Press AUDIO and hold until frequency
and the Q factor (e.g., F- 80 Q 1W) appears
in the display.
2
Press AUDIO to select the desired band
for adjustment.
Low—Mid—High
3
Press c or d to select the desired fre-
quency.
Low: 40—80—100—160 (Hz)
Mid: 200—500—1k—2k (Hz)
High: 3k—8k—10k—12k (Hz)
4
Press a or b to select the desired Q fac-
tor.
2N—1N—1W—2W

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select LOUD.
2
Press a to turn loudness on.
LOUD indicator is displayed.
# To turn loudness off, press b.
# You can also turn loudness on or off by press-
ing LOUDNESS.
3
Press c or d to select a desired level.
LOW (low)—MID (mid)—HI (high)

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a
simple method of enhancing front imaging by
cutting mid- and high-range frequency output
from the rear speakers, limiting their output to
low-range frequencies. You can select the fre-
quency you want to cut.
Section
02
11
En

Advertisement

Table of Contents
loading

Table of Contents