Black & White; Purecinema - Pioneer PDP-433HDE Operating Instructions Manual

Basic adjustment settings
AV
SELECTION
MENU
ENTER
/
PDP-503HDE/(E)-c
MENU
Picture
DYNAMIC
Advanced
Black & White
Off
On
MENU
Picture
DYNAMIC
Advanced

PureCinema

[On]
Off
On
34
Black & White
For viewing a video in monochrome.
1
Press MENU.
2
Press / to select "Picture", and then press
ENTER.
[On]
3
Press / to select "Advanced", and then press
ENTER.
4
Press / to select "Black & White", and then press
ENTER.
5
Press / to select "On", and then press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• If you select "STANDARD" with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 50.
PureCinema
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
recreates each still film frame for high-definition picture
quality.
1
Press MENU.
2
Press / to select "Picture", and then press
ENTER.
3
Press / to select "Advanced", and then press
ENTER.
4
Press / to select "PureCinema", and then press
ENTER.
5
Press / to select "On", and then press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing n.
• If you select "STANDARD" with AV SELECTION on the
remote control unit, or input sources with vertical
frequency 50 Hz (e.g. PAL, SECAM etc.), this item will
display in gray and not be selectable. See page 50.
8/31/02, 5:48 PM
34