Using The Aux Source - Pioneer DEH-2220UB Operation Manual

Operating this unit
FM STEP (FM tuning step)
Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100 kHz. It may be preferable to set the
tuning step to 50 kHz when AF is on.
• The tuning step remains at 50 kHz during manual tuning.
1. Press M.C. to display the setting mode.
2. Turn M.C. to select the FM tuning step.
50 KHZ (50 kHz) – 100 KHZ (100 kHz)
3. Press M.C. to confirm the selection.
AUTO-PI (auto PI seek)
The unit can automatically search for a different station with the same programming,
even during preset recall.
* Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using auxiliary device connected to this unit.
* Press M.C. to turn AUX on or off.
USB (plug and play)
This setting allows you to switch your source to USB automatically.
* Press M.C. to turn the plug and play on or off.
ON – When USB storage device is connected, the source is automatically switched to
USB. If you disconnect your USB storage device, this unit's source is turned off.
OFF – When USB storage device is connected, the source is not switched to USB
automatically. Please change the source to USB manually.
TITLE (multi language)
This unit can display the text information of a compressed audio file even if they are
embedded in a Western European or Russian language.
• If the embedded language and the selected language setting are not the same, text
information may not be displayed properly.
• Some characters may not be displayed properly.
1. Press M.C. to display the setting mode.
2. Turn M.C. to select the desired setting.
EUROPEAN (European) – RUSSIAN (Russian)
3. Press M.C. to confirm the selection.
PW SAVE (power saving)
Switching this function on enables you to reduce the consumption of battery power.
• Turning on the source is the only operation allowed when this function is on.
* Press M.C. to turn the power save on or off.
Note
• Operation is complete even if the menu is cancelled before being confirmed.

Using the AUX source

1. Insert the stereo mini plug into the AUX input jack.
2. Press SRC/OFF to select AUX as the source.
Note
• AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to
"AUX (auxiliary input)" on page 13.
13