Installation Of The Cooktop; Before You Begin; Tools You Will Need; Electrical Requirements - GE JP200 Owner's Manual

Installation of the cooktop.

Read these instructions completely and carefully.

Before You Begin

Read these instructions completely
and carefully.
IMPORTANT—Save these instructions
for local inspector's use.
IMPORTANT—Observe all governing codes
and ordinances.

Tools You Will Need

I "
I
I

Electrical Requirements

CAUTION: for personal safety, remove house
fuse or circuit breaker before beginning
installation.

Electrical Connections

DANGER: The electrical power to the
counter unit supply line must be shut off
while line connections are being made. Failure
to do so could result in serious injury or death.
to aluminum wiring, properly installed connections
listed for use with aluminum and copper wiring
must be used.
10
NOTE TO INSTALLER—Be sure to leave these
instructions with the Consumer.
NOTE: This appliance must be properly
grounded.
I
I
I
If you fail to wire your counter unit in
accordance with governing codes, you
may create a hazardous condition.
If you connect