Non-TTL auto flash A mode
Usable cameras
and lenses
The SB-80DX's built-in sensor measures the flash illumination reflected back
from the subject, automatically controlling the SB-80DX's light output to give the
correct exposure. This allows you to make exposure compensation (p. 56)
easily by varying the aperture set on the camera or lens.
40
Any camera and lens combination. (For Digital SLRs, it is
possible only when a non-CPU lens is mounted.)
1
Set the camera's exposure mode to Aperture-
Priority Auto (A) or Manual (M).
Press the a button until "A" appears on the
2
LCD panel.
Press the e or f button to change the
3
aperture, bringing the subject within the flash
shooting distance range.
4
Set the aperture that appears on the SB-80DX's
LCD panel on the lens or camera.
5
Set the camera to its highest flash sync shutter
speed.
n For details, see the camera's instruction manual.