Sending A Status Call - Motorola APX 6000 User Manual

4 Press the Menu Select button directly below Sel to save the
currently selected talkgroup and return to the Home screen.
5
If the encryption key associated to the new talkgroup is
erased, you hear a momentary key fail tone and the display
shows Key fail.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, you hear a momentary key fail tone and the
display shows Illegal key.
H
6
Press to return to the Home screen.


Sending a Status Call

This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of eight status conditions is possible.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Status button and proceed to
Step 3.
OR
Follow the procedure below.
< >
1 to Sts.
or
2
Press the Menu Select button directly below Sts.
3
The display shows the last acknowledged status call, or the
first status in the list.
U D
4
or to the required status.
OR
Use the keypad to enter a number corresponding to the in
the status list.
5
Press the PTT button to send the status.
6
When the dispatcher acknowledges, you hear four tones
and the display shows Ack received. The radio returns to
normal dispatch operation.
OR
If no acknowledgment is received, you hear a low-pitched
tone and the display shows No acknowledge.
H
7
Press to return to the Home screen.
No traffic is heard on trunked channels while Status Call is
selected. If the radio detects no Status Call activity for six
seconds, you will hear an alert tone until you press
PTT button.
H
or the
49
English