IBM 6400 Series User Manual page 133

KDC Sub-Tab
You must click Read to obtain the printer's settings before you can modify
them.
NOTE: If the Ethernet Interface has a password assigned to the user guest,
KDC Port: The TCP/UDP port number used by the KDC. The default is 88.
KDC Name: The name of the KDC which the Access Point is registered. The
default is krbtgt.
KDC Realm: The realm of the KDC which the Access Point is registered. The
default is LOCALREALM.
Clock Skew/Units: The maximum allowable time difference between the
Print Server clock and the KDC clock, in seconds, hours, or days. The default
is 300 seconds.
Ticket Lifetime/Units: The maximum allowable ticket lifetime in seconds,
hours, or days. The range is 300 seconds to 3 days. The default is 10 hours.
When you are finished, click Send to transmit the values to the printer.
NOTE: If the Ethernet Interface has a password assigned to the user root,
If you are not going to modify settings on any other tabs, you must update the
printer for the settings to take effect. Click Update to update the printer.
IMPORTANT
Make sure the settings match those configured in the Access Point.
Figure 111. Wireless Properties:
Kerberos Tab – KDC Sub-Tab
then a Telnet guest password is required. See "Security Tab" on
page 58.
then a Telnet root password is required. See "Security Tab" on
page 58.
Kerberos Tab
133