IBM 6400 Series User Manual page 120

Chapter 3
Job Capture
• Twinax Host Data
• Coax Host Data
• C/T Base Emulation
PCI Ethernet In
•
• USB In
NOTE: The USB port is available only on 6700 and 6700-M40 Series thermal
Triggers
A Trigger allows a selective capture of host data. You need to specify two
triggers, a start trigger and an end trigger. Select Triggers Configure.
See Figure 98.
Enter triggers as text or hex strings with a maximum length of 256 characters.
Job Capture scans received data for the start trigger sequence. Once found,
data capture begins and continues until Job Capture finds the end trigger.
If you do not set a start trigger, all data is captured when the Job Capture
starts. If you do not set an end trigger, the data will continue to capture until
you stop it.
A second trigger option is a trigger count. You can set Job Capture to start or
stop once it finds a set number of start and/or stop triggers. The window that
displays captured data shows any lines containing start triggers and highlights
the start trigger strings. You can also use the Search feature to search
through captured data.
The Ignore Case check box allows character case to be ignored. Check the
box to search for a string regardless of character case, and the data will
capture once the string is found.
NOTE: You cannot apply triggers to Coax/Twinax and TCP/IPDS jobs.
Options
Disable Printing
Select Options Disable Printing to capture data without printing.
120
printers.
Figure 98. Configure Triggers Window